AZ104-Quiz27

Category: None

AZ104-Q988

Your company’s Azure subscription includes two Azure networks named VirtualNetworkA and VirtualNetworkB.
VirtualNetworkA includes a VPN gateway that is configured to make use of static routing. Also, a site-to-site VPN connection exists between your company’s on-premises network and VirtualNetworkA.

You have configured a point-to-site VPN connection to VirtualNetworkA from a workstation running Windows 10. After configuring virtual network peering between VirtualNetworkA and VirtualNetworkB, you confirm that you are able to access VirtualNetworkB from the company’s on-premises network. However, you find that you cannot establish a connection to VirtualNetworkB from the Windows 10 workstation.
You have to make sure that a connection to VirtualNetworkB can be established from the Windows 10 workstation.

Solution: You choose the Allow gateway transit setting on VirtualNetworkB. Does the solution meet the goal?

Yes

No

Category: None

AZ104-Q989

Your company’s Azure subscription includes two Azure networks named VirtualNetworkA and VirtualNetworkB.
VirtualNetworkA includes a VPN gateway that is configured to make use of static routing. Also, a site-to-site VPN connection exists between your company’s on-premises network and VirtualNetworkA.

You have configured a point-to-site VPN connection to VirtualNetworkA from a workstation running Windows 10. After configuring virtual network peering between VirtualNetworkA and VirtualNetworkB, you confirm that you are able to access VirtualNetworkB from the company’s on-premises network. However, you find that you cannot establish a connection to VirtualNetworkB from the Windows 10 workstation.
You have to make sure that a connection to VirtualNetworkB can be established from the Windows 10 workstation.

Solution: You download and re-install the VPN client configuration package on the Windows 10 workstation.
Does the solution meet the goal?

Yes

No

Category: None

AZ104-Q990

Your company has virtual machines (VMs) hosted in Microsoft Azure. The VMs are located in a single Azure virtual

network named VNet1.

The company has users that work remotely. The remote workers require access to the VMs on VNet1. You need to provide

access for the remote workers.

What should you do?

Configure a Site-to-Site (S2S) VPN.

Configure a VNet-toVNet VPN.

Configure a Point-to-Site (P2S) VPN.

Configure DirectAccess on a Windows Server 2012 server VM.

Configure a Multi-Site VPN

Category: None

AZ104-Q991

Your company has a Microsoft SQL Server Always On availability group configured on their Azure virtual machines

(VMs).

You need to configure an Azure internal load balancer as a listener for the availability group.

Solution: You create an HTTP health probe on port 1433.

Does the solution meet the goal?

Yes

No

Category: None

AZ104-Q992

Your company has a Microsoft SQL Server Always On availability group configured on their Azure virtual machines

(VMs).

You need to configure an Azure internal load balancer as a listener for the availability group.

Solution: You set Session persistence to Client IP.

Does the solution meet the goal?

Yes

No

Category: None

AZ104-Q993

Your company has a Microsoft SQL Server Always On availability group configured on their Azure virtual machines (VMs).

You need to configure an Azure internal load balancer as a listener for the availability group.

Solution: You enable Floating IP.

Does the solution meet the goal?

Yes

No

Category: None

AZ104-Q994

Your company has two on-premises servers named SRVO1 and SRVO2. Developers have created an application that runs

on SRV01. The application calls a service on SRVO2 by IP address.

You plan to migrate the application on Azure virtual machines (VMs). You have configured two VMs on a single subnet in an

Azure virtual network.

You need to configure the two VMs with static internal IP addresses.

What should you do?

Run the New-AzureRMVMConfig PowerShell cmdlet.

Run the Set-AzureSubnet PowerShell cmdlet.

Modify the VM properties in the Azure Management Portal.

Modify the IP properties in Windows Network and Sharing Center.

Run the Set-AzureStaticVNetIP PowerShell cmdlet.

Category: None

AZ104-Q995

Your company has an Microsoft Entra ID (Microsoft Entra ID) subscription.

You need to deploy five virtual machines (VMs) to your company’s virtual network subnet.

The VMs will each have both a public and private IP address. Inbound and outbound security rules for all of these virtual

machines must be identical.

Which of the following is the least amount of network interfaces needed for this configuration?

5

10

20

40

Category: None

AZ104-Q996

Your company has an Microsoft Entra ID (Microsoft Entra ID) subscription.

You need to deploy five virtual machines (VMs) to your company’s virtual network subnet.

The VMs will each have both a public and private IP address. Inbound and outbound security rules for all of these virtual

machines must be identical.

Which of the following is the least amount of security groups needed for this configuration?

4

3

2

1

Category: None

AZ104-Q997

Your company’s Azure subscription includes Azure virtual machines (VMs) that run Windows Server 2016. One of the

VMs is backed up every day using Azure Backup Instant Restore.

When the VM becomes infected with data encrypting ransomware, you decide to recover the VM’s files.

Which of the following is TRUE in this scenario?

You can only recover the files to the infected VM.

You can recover the files to any VM within the company’s subscription.

You can only recover the files to a new VM.

You will not be able to recover the files.

Category: None

AZ104-Q998

Your company’s Azure subscription includes Azure virtual machines (VMs) that run Windows Server 2016. One of the

VMs is backed up every day using Azure Backup Instant Restore.

When the VM becomes infected with data encrypting ransomware, you are required to restore the VM.

Which of the following actions should you take?

You should restore the VM after deleting the infected VM.

You should restore the VM to any VM within the company’s subscription.

You should restore the VM to a new Azure VM.

You should restore the VM to an on-premise Windows device.

Category: None

AZ104-Q999

You administer a solution in Azure that is currently having performance issues.

You need to find the cause of the performance issues pertaining to metrics on the Azure infrastructure.

Which of the following is the tool you should use?

Azure Traffic Analytics

Azure Monitor

Azure Activity Log

Microsoft Entra IDvisor

Category: None

AZ104-Q1000

You have an Microsoft Entra ID (Microsoft Entra ID) tenant named contosocloud.onmicrosoft.com. Your company has a public DNS zone for contoso.com.

You add contoso.com as a custom domain name to Microsoft Entra ID. You need to ensure that Azure can verify the domain name.

Which type of DNS record should you create?

MX

NSEC

SRV

NSEC3

Category: None

AZ104-Q1001

You have an Microsoft Entra ID (Microsoft Entra ID) tenant named contoso.onmicrosoft.com. The User administrator role is

assigned to a user named Admin1.

An external partner has a Microsoft account that uses the user1@outlook.com sign in.

Admin1 attempts to invite the external partner to sign in to the Microsoft Entra ID tenant and receives the following error

message: “Unable to invite user user1 @outlook.com – Generic authorization exception.”

You need to ensure that Admin1 can invite the external partner to sign in to the Microsoft Entra ID tenant.

What should you do?

From the Users blade, modify the External collaboration settings.

From the Custom domain names blade, add a custom domain.

From the Organizational relationships blade, add an identity provider.

From the Roles and administrators blade, assign the Security administrator role to Admin1.

Category: None

AZ104-Q1002

You need to ensure that an Microsoft Entra ID (Microsoft Entra ID) user named Admin1 is assigned the required role to

enable Traffic Analytics for an Azure subscription.

Solution: You assign the Reader role at the subscription level to Admin1.

Does this meet the goal?

Yes

No

Category: None

AZ104-Q1003

You have an Azure subscription that contains a resource group named TestRG. You use TestRG to validate an Azure deployment.

TestRG contains the following resources:

Name	Type	Description
VM1	Virtual Machine	VM1 is running and configured to back up to Vault1 daily
Vault1	Recovery Services Vault	Vault1 includes all backups of VM1
VNET1	Virtual Network	VNET1 has a resource lock of type Delete

You need to delete TestRG. What should you do first?

Modify the backup configurations of VM1 and modify the resource lock type of VNET1

Remove the resource lock from VNET1 and delete all data in Vault1

Turn off VM1 and remove the resource lock from VNET1

Turn off VM1 and delete all data in Vault1

Category: None

AZ104-Q1004

You need to ensure that an Microsoft Entra ID (Microsoft Entra ID) user named Admin1 is assigned the required role to

enable Traffic Analytics for an Azure subscription.

Solution: You assign the Traffic Manager Contributor role at the subscription level to Admin1. Does this meet the goal?

Yes

No

Category: None

AZ104-Q1005

You have three offices and an Azure subscription that contains an Microsoft Entra ID (Microsoft Entra ID) tenant. You

need to grant user management permissions to a local administrator in each office.

What should you use?

Microsoft Entra ID roles

administrative units

access packages in Microsoft Entra ID entitlement management

Azure roles

Category: None

AZ104-Q1006

You have an Azure Directory (Microsoft Entra ID) tenant named Adatum and an Azure Subscription named Subscription1.

Adatum contains a group named Developers. Subscription1 contains a resource group named Dev.

You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.

Solution: On Dev, you assign the Logic App Contributor role to the Developers group. Does this meet the goal?

Yes

No

Category: None

AZ104-Q1007

You have an Azure subscription named Subscription1 that contains a virtual network named VNet1. VNet1 is ina

resource group named RG1.

Subscription! has a user named User1. User1 has the following roles:

-Reader

-Security Admin

-Security Reader

You need to ensure that User1 can assign the Reader role for VNet1 to other users.

What should you do?

Remove User1 from the Security Reader role for Subscription1. Assign User1 the Contributor role for RG1.

Assign User1 the Owner role for VNet1.

Assign User1 the Contributor role for VNet1.

Assign User1 the Network Contributor role for VNet1.

Category: None

AZ104-Q1008

You have an Azure subscription that contains the following users in an Microsoft Entra ID tenant named contoso.onmicrosoft.com:

Name	Role	Scope
User1	Global administrator	Azure Active Directory
User2	Global administrator	Azure Active Directory
User3	User administrator	Azure Active Directory
User4	Owner	Azure Subscription

User1 creates a new Microsoft Entra ID tenant named external.contoso.onmicrosoft.com.

You need to create new user accounts in external.contoso.onmicrosoft.com.

Solution: You instruct User2 to create the user accounts.

Does that meet the goal?

Yes

No

Category: None

AZ104-Q1009

You have an Microsoft Entra ID (Microsoft Entra ID) tenant named contoso.com.

You have a CSV file that contains the names and email addresses of 500 external users.

You need to create a guest user account in contoso.com for each of the 500 external users.

Solution: You create a PowerShell script that runs the New-MgUser cmdlet for each external user.

Does this meet the goal?

Yes

No

Category: None

AZ104-Q1010

You have an Microsoft Entra ID (Microsoft Entra ID) tenant named contoso.com.

You have a CSV file that contains the names and email addresses of 500 external users.

You need to create a guest user account in contoso.com for each of the 500 external users.

Solution: You create a PowerShell script that runs the New-Mglnvitation cmdlet for each external user.

Does this meet the goal?

Yes

No

Category: None

AZ104-Q1011

You have an Microsoft Entra ID (Microsoft Entra ID) tenant named contoso.com.

You have a CSV file that contains the names and email addresses of 500 external users.

You need to create a guest user account in contoso.com for each of the 500 external users.

Solution: You create a PowerShell script that runs the New-MgUser cmdlet for each user.

Does this meet the goal?

Yes

No

Category: None

AZ104-Q1012

Case study

This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete
each case. However, there may be additional case studies and sections on this exam. You must manage your time to
ensure that you are able to complete all questions included on this exam in the time provided.

To answer the questions included in a case study, you will need to reference information that is provided in the case study.
Case studies might contain exhibits and other resources that provide more information about the scenario that is
described in the case study. Each question is independent of the other questions in this case study.

At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make
changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study

To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs.

When you are ready to answer a question, click the Question button to return to the question.

Overview
General Overview
Contoso, Ltd. is a consulting company that has a main office in Montreal and branch offices in Seattle and New York.
Environment
Existing Environment
Contoso has an Azure subscription named Sub1 that is linked to an Microsoft Entra ID (Microsoft Entra ID) tenant. The network contains an on-premises Active Directory domain that syncs to the Microsoft Entra ID tenant.
The Microsoft Entra ID tenant contains the users shown in the following table.

Name	Type	Role
User1	Member	None
User2	Guest	None
User3	Member	None
User4	Member	None

Sub1 contains two resource groups named RG1 and RG2 and the virtual networks shown in the following table.

Name	Subnet	Peered with
VNET1	Subnet1, Subnet2	VNET2
VNET2	Subnet1	VNET1, VNET3
VNET3	Subnet1	VNET2
VNET4	Subnet1	None

User1 manages the resources in RG1. User4 manages the resources in RG2.
Sub1 contains virtual machines that run Windows Server 2019 as shown in the following table

Name	IP address	Location	Connected to
VM1	10.0.1.4	West US	VNET1/Subnet1
VM2	10.0.2.4	West US	VNET1/Subnet2
VM3	172.16.1.4	Central US	VNET2/Subnet1
VM4	192.168.1.4	West US	VNET3/Subnet1
VM5	10.0.22.4	East US	VNET4/Subnet1

No network security groups (NSGs) are associated to the network interfaces or the subnets.
Sub1 contains the storage accounts shown in the following table.

Name	Kind	Location	File share	Identity-based access for file share
storage1	Storage (general purpose v1)	West US	sharea	Azure Active Directory Domain Services (Azure AD DS)
storage2	StorageV2 (general purpose v2)	East US	shareb, sharec	Disabled
storage3	BlobStorage	East US 2	Not applicable	Not applicable
storage4	FileStorage	Central US	shared	Azure Active Directory Domain Services (Azure AD DS)

Requirements
Planned Changes
Contoso plans to implement the following changes:
– Create a blob container named container1 and a file share named share’ that will use the Cool storage tier.
– Create a storage account named storage5 and configure storage replication for the Blob service.
– Create an NSG named NSG1 that will have the custom inbound security rules shown in the following table.

Priority	Port	Protocol	Source	Destination	Action
500	3389	TCP	10.0.2.0/24	Any	Deny
1000	Any	ICMP	Any	VirtualNetwork	Allow

-Associate NSG1 to the network interface of VM1.
-Create an NSG named NSG2 that will have the custom outbound security rules shown in the following table.

Priority	Port	Protocol	Source	Destination	Action
200	3389	TCP	10.0.0.0/16	VirtualNetwork	Deny
400	Any	ICMP	10.0.2.0/24	10.0.1.0/24	Allow

-Associate NSG2 to VNET1/Subnet2.

Technical Requirements

Contoso must meet the following technical requirements:

-Create container1 and share1.

-Use the principle of least privilege.

-Create an Microsoft Entra ID security group named Group4.

-Back up the Azure file shares and virtual machines by using Azure Backup.

-Trigger an alert if VM1 or VM2 has less than 20 GB of free space on volume C.

-Enable User1 to create Azure policy definitions and User2 to assign Azure policies to RG1.

-Create an internal Basic Azure Load Balancer named LB1 and connect the load balancer to VNET1/Subnet1
-Enable flow logging for IP traffic from VM5 and retain the flow logs for a period of eight months.
-Whenever possible, grant Group4 Azure role-based access control (Azure RBAC) read-only permissions to the Azure file shares.

You need to ensure that you can grant Group4 Azure RBAC read only permissions to all the Azure file shares.

What should you do?

On storage2, enable identity-based access for the file shares.

Recreate storage2 and set Hierarchical namespace to Enabled.

On storage’ and storage4, change the Account kind type to StorageV2 (general purpose v2).

Create a shared access signature (SAS) for storage’, storage2, and storage4.

Category: None

AZ104-Q1013

You have an Azure subscription named Subscription1 that contains the storage accounts

shown in the following table:

Name	Account kind	Azure service that contains data
storage1	Storage	File
storage2	StorageV2 (general purpose v2)	File, Table
storage3	StorageV2 (general purpose v2)	Queue
storage4	BlobStorage	Blob

You plan to use the Azure Import/Export service to export data from Subscription1. You need to identify which storage account can be used to export the data.

What should you identify?

storage1

storage2

storage3

storage4

Category: None

AZ104-Q1014

Case study

This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete
each case. However, there may be additional case studies and sections on this exam. You must manage your time to
ensure that you are able to complete all questions included on this exam in the time provided.

To answer the questions included in a case study, you will need to reference information that is provided in the case study.
Case studies might contain exhibits and other resources that provide more information about the scenario that is
described in the case study. Each question is independent of the other questions in this case study.

At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make
changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study

To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content
of the case study before you answer the questions. Clicking these buttons displays information such as business
requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the
information displayed is identical to the information displayed on the subsequent tabs.

When you are ready to answer a question, click the Question button to return to the question.

Overview
General Overview
Contoso, Ltd. is a consulting company that has a main office in Montreal and branch offices in Seattle and New York.
Environment
Existing Environment
Contoso has an Azure subscription named Sub1 that is linked to an Microsoft Entra ID (Microsoft Entra ID) tenant. The network contains an on-premises Active Directory domain that syncs to the Microsoft Entra ID tenant.
The Microsoft Entra ID tenant contains the users shown in the following table.

Name	Type	Role
User1	Member	None
User2	Guest	None
User3	Member	None
User4	Member	None

Sub1 contains two resource groups named RG1 and RG2 and the virtual networks shown in the followingtable.

Name	Subnet	Peered with
VNET1	Subnet1, Subnet2	VNET2
VNET2	Subnet1	VNET1, VNET3
VNET3	Subnet1	VNET2
VNET4	Subnet1	None

User1 manages the resources in RG1. User4 manages the resources in RG2.
Sub1 contains virtual machines that run Windows Server 2019 as shown in the following table

Name	IP address	Location	Connected to
VM1	10.0.1.4	West US	VNET1/Subnet1
VM2	10.0.2.4	West US	VNET1/Subnet2
VM3	172.16.1.4	Central US	VNET2/Subnet1
VM4	192.168.1.4	West US	VNET3/Subnet1
VM5	10.0.22.4	East US	VNET4/Subnet1

No network security groups (NSGs) are associated to the network interfaces or the subnets.
Sub1 contains the storage accounts shown in the following table.

Name	Kind	Location	File share	Identity-based access for file share
storage1	Storage (general purpose v1)	West US	sharea	Azure Active Directory Domain Services (Azure AD DS)
storage2	StorageV2 (general purpose v2)	East US	shareb, sharec	Disabled
storage3	BlobStorage	East US 2	Not applicable	Not applicable
storage4	FileStorage	Central US	shared	Azure Active Directory Domain Services (Azure AD DS)

Planned Changes
Contoso plans to implement the following changes:
-Create a blob container named container1 and a file share named share’ that will use the Cool storage tier.
-Create a storage account named storage5 and configure storage replication for the Blob service.
-Create an NSG named NSG1 that will have the custom inbound security rules shown in the following table.

Priority	Port	Protocol	Source	Destination	Action
500	3389	TCP	10.0.2.0/24	Any	Deny
1000	Any	ICMP	Any	VirtualNetwork	Allow

-Associate NSG1 to the network interface of VM1.
-Create an NSG named NSG2 that will have the custom outbound security rules shown in the following table.

Priority	Port	Protocol	Source	Destination	Action
200	3389	TCP	10.0.0.0/16	VirtualNetwork	Deny
400	Any	ICMP	10.0.2.0/24	10.0.1.0/24	Allow

-Associate NSG2 to VNET1/Subnet2.

Technical Requirements

Contoso must meet the following technical requirements:

-Create container1 and share1.

-Use the principle of least privilege.

-Create an Microsoft Entra ID security group named Group4.

-Back up the Azure file shares and virtual machines by using Azure Backup.

-Trigger an alert if VM1 or VM2 has less than 20 GB of free space on volume C.

-Enable User1 to create Azure policy definitions and User2 to assign Azure policies to RG1.

-Create an internal Basic Azure Load Balancer named LB1 and connect the load balancer to VNET1/Subnet1
-Enable flow logging for IP traffic from VM5 and retain the flow logs for a period of eight months.
-Whenever possible, grant Group4 Azure role-based access control (Azure RBAC) read-only permissions to the
Azure file shares.

You need to identify which storage account to use for the flow logging of IP traffic from VM5. The solution must meet the retention requirements.

Which storage account should you identify?

storage1

storage2

storage3

storage4

Category: None

AZ104-Q1015

You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template

named ARM1.json.

You receive a notification that VM1 will be affected by maintenance. You need to move VM1 to a different host immediately.

Solution: From the Update management blade, you click Enable. Does this meet the goal?

Yes

No

Category: None

AZ104-Q1016

You have an Azure subscription that contains the resources shown in the following table.

Name	Type	Region
RG1	Resource group	West US
RG2	Resource group	East Asia
storage1	Storage account	West US
storage2	Storage account	East Asia
VM1	Virtual machine	West US
VNET1	Virtual network	West US
VNET2	Virtual network	East Asia

VMI connects to VNET1.

You need to connect VMI to VNET2.

Solution: You turn off VM1, and then you add a new network interface to VM1. Does this meet the goal?

Yes

No

Category: None

AZ104-Q1017

You create the following resources in an Azure subscription:

-An Azure Container Registry instance named Registry1

-An Azure Kubernetes Service (AKS) cluster named Cluster1

You create a container image named App1 on your administrative workstation. You need to deploy App1 to Cluster1.

What should you do first?

Run the docker push command.

Create an App Service plan.

Run the azacr build command.

Run the azaks create command.

Category: None

AZ104-Q1018

You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.

You need to view the date and time when the resources were created in RG1.

Solution: From the Subscriptions blade, you select the subscription, and then click Resource providers.

Does this meet the goal?

Yes

No

Category: None

AZ104-Q1019

You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.

You need to view the date and time when the resources were created in RG1.

Solution: From the RG1 blade, you click Automation script.

Does this meet the goal?

Yes

No

Category: None

AZ104-Q1020

You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.

You need to view the date and time when the resources were created in RG1.

Solution: From the RG1 blade, you click Deployments. Does this meet the goal?

Yes

No

Category: None

AZ104-Q1021

You have an Azure subscription named Subscription1.

You deploy a Linux virtual machine named VM1 to Subscription1. You need to monitor the metrics and the logs of VM1.

What should you use?

Azure HDInsight

Linux Diagnostic Extension (LAD) 3.0

the AzurePerformanceDiagnostics extension

Azure Analysis Services

Category: None

AZ104-Q1022

You plan to deploy three Azure virtual machines named VM1, VM2, and VM3. The virtual machines will host a web app

named App1.

You need to ensure that at least two virtual machines are available if a single Azure datacenter becomes unavailable.

What should you deploy?

all three virtual machines in a single Availability Zone

all virtual machines in a single Availability Set

each virtual machine in a separate Availability Zone

each virtual machine in a separate Availability Set

Category: None

AZ104-Q1023

You have an Azure virtual machine named VM1 that runs Windows Server 2019.

You save VM1 as a template named Template’ to the Azure Resource Manager library. You plan to deploy a virtual machine

named VM2 from Template1.

What can you configure during the deployment of VM2?

operating system

administrator username

virtual machine size

resource group

Category: None

AZ104-Q1024

You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs a financial reporting app

named App1 that does not support multiple active instances.

At the end of each month, CPU usage for VM1 peaks when App! runs.

You need to create a scheduled runbook to increase the processor performance of VM1 at the end of each month.What task

should you include in the runbook?

Add the Azure Performance Diagnostics agent to VM1.

Modify the VM size property of VM1.

Add VM1 to a scale set.

Increase the vCPU quota for the subscription.

Add a Desired State Configuration (DSC) extension to VM1.

Category: None

AZ104-Q1025

You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by

using an Azure Resource Manager template.

You need to ensure that NGINX is available on all the virtual machines after they are deployed.

What should you use?

Deployment Center in Azure App Service

A Desired State Configuration (DSC) extension

the New-AzConfigurationAssignmentcmdlet

a Microsoft Intune device configuration profile

Category: None

AZ104-Q1026

You have an Azure virtual machine named VM1 that runs Windows Server 2019. The VM was deployed using default drive

settings.

You sign in to VM1 as a user named User1 and perform the following actions:

-Create files on drive C.

-Create files on drive D.

-Modify the screen saver timeout.

-Change the desktop background.

You plan to redeploy VM1.

Which changes will be lost after you redeploy VM1?

the modified screen saver timeout

the new desktop background

the new files on drive D

the new files on drive C

Category: None

AZ104-Q1027

You have an Azure subscription.
You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit tab.)

You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines.

What should you modify on VM1?

the memory

the network adapters

the hard drive

the processor

Integration Services

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question

26. Question

27. Question

28. Question

29. Question

30. Question

31. Question

32. Question

33. Question

34. Question

35. Question

36. Question

37. Question

38. Question

39. Question

40. Question